Deutz F3L913 engine with 55hp and 2300 RPM max speed. The included bellhousing is an SAE 3. This engine was rebuilt and used for about a year before we received it. They even had the Bosch pump redone as well as the heads and injectors. This is a 913 series which is quite similar to the 912 series engines - the 913 is a newer version of the 912 - it is possible to install a 913 in place of a 912. This engine is a 2003 model year. Idle oil pressure (see gauge in video below) is around 65psi and full throttle oil pressure is close to 90 psi - among other factor this indicates a good strong bottom end with good tight tolerances. This engine starts up quickly and runs well without any odd noises. There is no blowby from the oil filler or blowby tube. The 2300 RPM engine allows you to run it in many different machines including water pumps, concrete pumps, and skid steers. Includes engine from valve covers down to oil pan, fan to flywheel; air cleaner assembly is also included. You will also get alternator, starter, and bellhousing. The fuel shut off solenoid is getting weak and requires manually pulling up while holding murphy switch - then you can turn the key to start. This can be fixed with a new fuel shut off solenoid or conversion to mechanical/manual shutoff. We can ship this directly to you or we can ship to your local Fastenal store or freight terminal for incredibly low cost. Buyer pays shipping costs - please message for shipping quote before purchasing.
Cold Start Video: https://www.youtube.com/embed/cjAU8pGOT2c?rel=0
Deutz F3L913 engine with 55hp and 2300 RPM max speed. The included bellhousing is an SAE 3. This engine was rebuilt and used for about a year before we received it. They even had the Bosch pump redone as well as the heads and injectors. This is a 913 series which is quite similar to the 912 series engines - the 913 is a newer version of the 912 - it is possible to install a 913 in place of a 912. This engine is a 2003 model year. Idle oil pressure (see gauge in video below) is around 65psi and full throttle oil pressure is close to 90 psi - among other factor this indicates a good strong bottom end with good tight tolerances. This engine starts up quickly and runs well without any odd noises. There is no blowby from the oil filler or blowby tube. The 2300 RPM engine allows you to run it in many different machines including water pumps, concrete pumps, and skid steers. Includes engine from valve covers down to oil pan, fan to flywheel; air cleaner assembly is also included. You will also get alternator, starter, and bellhousing. The fuel shut off solenoid is getting weak and requires manually pulling up while holding murphy switch - then you can turn the key to start. This can be fixed with a new fuel shut off solenoid or conversion to mechanical/manual shutoff. We can ship this directly to you or we can ship to your local Fastenal store or freight terminal for incredibly low cost. Buyer pays shipping costs - please message for shipping quote before purchasing.
Cold Start Video: https://www.youtube.com/embed/cjAU8pGOT2c?rel=0
